Archimedean Screw Pumps Market Size, Share, Forecast, & Trends Analysis by Type (Enclosed Screw Pumps, Open Screw Pumps), Application (Sewage Treatment, Irrigation, Industrial Applications, Stormwater Management, Drainage, Power Generation), and Geography - Global Forecast to 2031

Increasing Utilization of Archimedean Screw Pumps in Sewage Treatment

Archimedean screw pumps serve various applications in sewage treatment processes, most commonly lifting raw sewage from lower collection points or sewage basins to higher elevations. This is especially important in areas with challenging topographies where gravity flow may be insufficient to transport sewage to the treatment facility. After preliminary treatment, sewage undergoes screening to remove large debris and solids. Archimedean screw pumps are used to transport these screened solids for further processing or disposal and help keep downstream treatment processes free from clogs and blockages. In sewage treatment plants that utilize anaerobic digestion for sludge treatment, Archimedean screw pumps are used to mix the sludge with anaerobic bacteria, ensuring efficient digestion and biogas production. Thus, the rising need to move contaminated water to treatment facilities is increasing the utilization of Archimedean screw pumps among sewage treatment plants, driving the growth of this market.

Growing Demand for Renewable Energy

Archimedean screw pumps are widely used in renewable energy generation, particularly in hydropower applications. They play a crucial role in converting the potential energy of flowing water into mechanical energy, which can then be harnessed to generate electricity.

The power generation applications of Archimedean screw pumps are as follows:

• Hydropower Generation: Hydropower plants are one of the primary application areas for Archimedean screw pumps. These pumps are used to lift water from lower reservoirs to higher elevations. When the water is released back into the lower reservoir, it flows through the screw pump, causing the screw to rotate. The rotational motion is then converted into mechanical energy by the generator, ultimately producing electricity. This process is known as the Archimedes screw turbine system.
• Low-head Hydropower: Archimedean screw pumps are particularly well-suited for low-head hydropower sites where the water flow is slow and traditional turbines may not be efficient. Low-head hydropower is hydropower generated at sites with a relatively small vertical drop. Archimedean screw pumps can be designed to accommodate these conditions, making them a viable solution for harnessing energy from low-head water sources.
• Decentralized Energy Generation: Archimedean screw pumps can be used for decentralized energy generation in remote areas or communities with access to flowing water sources. By harnessing the energy from local rivers or streams, these communities can generate renewable electricity to meet their energy needs without relying on centralized power grids.

The renewable energy trend is expected to gain more momentum in the coming years, supporting the growth of the Archimedean screw pumps market.

By Type: The Open Screw Pumps Segment to Dominate the Archimedean Screw Pumps Market in 2024

Based on type, the Archimedean screw pumps market is segmented into enclosed screw pumps and open screw pumps. In 2024, the open screw pumps segment is expected to account for the larger share of over 62.0% of the Archimedean screw pumps market. The large market share of this segment is attributed to the increasing adoption of open screw pumps for their higher pumping capacities, high efficiency, and minimal maintenance requirements.

Moreover, the open screw pumps segment is projected to register the higher CAGR during the forecast period due to the benefits of open screw pumps, such as variable pumping capacity without the need for unique controls, non-clogging architecture, and no pre-screening requirements.

By Application: The Sewage Treatment Segment to Dominate the Archimedean Screw Pumps Market in 2024

Based on application, the Archimedean screw pumps market is segmented into sewage treatment, irrigation, industrial applications, power generation, stormwater management, drainage, and other applications. In 2024, the sewage treatment segment is expected to account for the largest share of over 24.0% of the Archimedean screw pumps market. The large market share of this segment is attributed to the increasing demand for Archimedean screw pumps due to their simple design, low maintenance, and efficient operation, and the increasing use of Archimedean screw pumps to lift large quantities of sewage.

Also, the sewage treatment segment is projected to register the highest CAGR during the forecast period. The growth of this segment is driven by the benefits of Archimedean screw pumps in sewage treatment, such as handling a wide range of flow rates, suitability for transporting varying volumes of wastewater, handling liquids with high solid content, such as raw sewage, without clogging easily, and consuming a relatively lower amount of energy compared to other types of pumps.

Asia-Pacific to Dominate the Archimedean Screw Pumps Market in 2024

Based on geography, the Archimedean screw pumps market is segmented into North America, Europe, Asia-Pacific, Latin America, and the Middle East & Africa. In 2024, Asia-Pacific is expected to account for the largest share of over 47.0% of the Archimedean screw pumps market. Asia-Pacific’s significant market share is attributed to the increasingly stringent water & wastewater discharge regulations, growing demand for sustainable water management practices, and rising need for pumping solutions for hydropower generation in the region, and the increasing installations of Archimedean screw pumps in China, Japan, India, and South Korea.

Moreover, APAC is also projected to register the highest CAGR of over 3.5% during the forecast period. The growth of this regional market is driven by the rising adoption of Archimedean screw pumps in industrial wastewater treatment plants, the increasing use of Archimedean screw pumps for agricultural irrigation, growing government focus on the development of custom Archimedean screw pumps and sustainable water management practices and increasing industrialization across the region.

The report offers a competitive analysis based on an extensive assessment of the leading players’ product portfolios, geographic presence, and key growth strategies adopted in the last 3–4 years. Some of the key players operating in the Archimedean screw pumps market are Spaans Babcock BV (Netherlands), WAMGROUP S.p.A. (Italy), Rehart GmbH (Germany), VANDEZANDE BV (Netherlands), Jash Engineering Limited (India), Landustrie Sneek BV (Netherlands), KUHN GmbH Technische Anlagen (Germany), Lakeside Equipment Corporation (U.S.), Adasfa Sdn. Bhd. (Malaysia), Lektratek Water Technology (South Africa), PRO-Equipment, Inc. (U.S.), and Parkson  Corporation (U.S.).

Archimedean Screw Pumps Industry Overview: Latest Developments from Key Industry Players

• In April 2022, Jash Engineering Limited (India) inaugurated a facility at the Special Economic Zone in Pithampur to cater to the increasing overseas demand for cast products.
• In May 2021, the EU Cohesion Policy approved $92.8 million (€84 million) to construct a new sewage collection and treatment plant in Marathon, Greece.